Published: 08th December 2020
IIT Guwahati researchers develop an efficient method to harvest drinking water from humid air
With increasing water scarcity throughout the world, there have been attempts to collect and conserve water through non-traditional means
Researchers at Indian Institute of Technology Guwahati have developed novel materials that can efficiently harvest water from humid air. A research team led by Dr Uttam Manna, Associate Professor, Chemistry department and Centre of Nanotechnology, IIT Guwahati, along with his research scholars Kousik Maji, Avijit Das, and Manideepa Dhar, has published the results of this path-breaking work in the prestigious journal of The Royal Society of Chemistry.
With increasing water scarcity throughout the world, there have been attempts to collect and conserve water through non-traditional means. Scientists have turned to nature to design ways of water harvesting. For example, in regions of the world with naturally scanty rainfall, plants and insects have devised ingenious strategies to pull and collect water right out of the air. Mimicking this, scientists worldwide are trying to build technologies that can pull out water from thin air, both literally and figuratively.
“Such water-harvesting techniques use the concept of hydrophobicity or water-repelling nature of some materials”, explains Dr Manna. The concept of hydrophobicity can be understood by looking at the lotus leaf. The lotus leaf is water repellent because there is a layer of trapped air between the leaf surface and the water droplet, which causes the droplet to slide off the leaf. However simple hydrophobicity such as this is unsuitable for water harvesting from highly humid environments because high moisture content can displace the trapped air and cause permanent damage. Instead, researchers mimic the pitcher plant, an ‘insect-eating’ plant, that has a slippery surface that causes insects that land on it to fall into its tube-shaped structure, to be digested. In the past geometries of Rice leaves and cacti are associated with ‘Slippery Liquid-Infused Porous Surface(s)’ or SLIPS to improve the water harvesting performance.
The research team from IIT Guwahati has used the concept of chemically patterned SLIPS for the first time, to effectively harvest water from moist air. The researchers produced a patterned hydrophilic SLIP by spraying a sponge-like porous polymeric material on top of a simple A4 printer paper. Further, chemically modulated hydrophilic spots were associated on the coating prior to lubricating with two distinct types of oils – natural olive oil and synthetic krytox. This surface could harvest water from foggy/water vapour laden air without the need for any cooling arrangement.
“We have produced a highly efficient water harvesting interface where the fog collecting rate is as high as 4400±190 mg/cm2/h”, says the lead researcher, Dr Uttam Manna. The researchers have also compared the performance of their pitcher-plant inspired SLIPS materials to other bio-inspired ideas and have found theirs to be superior in terms of efficiency of water harvesting.
Given that more than 50 per cent of India’s population has no access to safe drinking water and about 200,000 people die every year due to lack of access to safe water, the inexpensive method for harvesting water from water vapour or fog droplets in air can potentially alleviate the water scarcity issues in the country.
Apart from water harvesting, SLIPS could be used for other purposes, such as easily cleanable household appliances, in underwater hulls of ships and submarines to prevent bio-fouling and anti-icing windows for aircraft.